Samsung CLX-8380ND User Manual page 108

Message Meaning
[xxx] toner The toner cartridge
cartridge is not you have installed is
compatible. Check not for your
userís guide machine.
[xxx] toner The toner cartridge
cartridge is not is not installed or the
installed. Install it CRUM (Consumer
Replaceable Unit
Monitor) in the
cartridge is not
properly connected.
[xxx] toner The color toner
cartridge is worn. cartridge has run out.
Replace with new The machine stops
one printing.
Note
If the black
toner
cartridge is
empty,
Mono Only
message
does not
appear.
The lifespan of the
[xxx] toner is
color toner cartridge
empty. Replace
which the arrow
toner cartridge
indicates is reached.
[xxx] toner is low.
The toner cartridge is
Order new toner almost empty.
cartridge
DC motor does not
There is a problem
operate: [zzz].
in the control of DC
Please turn off
motor unit.
then on
Suggested solutions
Install a Samsung-
genuine toner
cartridge, designed
for your machine.
Try to reinstall the
toner cartridge.
You can select the
option among Stop,
Continue or Mono
Only .
If you select Stop, the
machine stops
printing. If you select
Continue, the
machine keeps
printing, but the
quality cannot be
guaranteed.
If you select Mono
Only, the machine
prints the data in
black. In this case, the
mono printing feature
is preset in the printer
properties.
When you copy, the
Start button will be
activated only with
this condition.
If you do not select
any, the machine will
work as Stop is
selected.
Replace the color
toner cartridge with a
new one. (Page 11.4)
This message
appears when the
toner is completely
empty, and your
machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine
toner cartridge.
Ensure a
replacement
cartridge is in stock.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
12.12
Message Meaning
Did not supply
Not supplied toner to
enough [xxx]
the imaging unit.
toner. Remove
seal tape &
reinstall
Did not supply The machine
enough [xxx] received several
toner. Please papers with many
open/close door images, and it
cannot supply the
toner properly.
Fax memory is
There is no more
almost full. Print
available fax
or remove
memory. No more
received fax Job
fax data can be
received.
Fax memory is full.
Available fax
Print or remove
memory is now
received fax Job
1MB.
Finisher door is The finisher cover is
open. Close it not securely latched.
Finisher error:
There is a problem
[zzz]. Please turn
in the finisher unit.
off then on
Fuser error: [zzz].
There is a problem
Please turn off
in the fuser unit
then on
working.
Fuser unit is not
The fuser unit is not
installed correctly.
installed or correctly.
Install it
LSU error: [zzz].
There is a problem
Please turn off
in the control of LSU
then on
unit.
<Troubleshooting>
Suggested solutions
• Remove the
sealing tape from
the imaging unit.
• Thoroughly roll the
toner cartridge five
or six times, and
reinstall it.
• Turn the machine
off and turn it on
again.
Open side door and
close it. If the
problem still persists,
please call for
service.
Delete the received
fax data in the
memory. Call for
service to delete fax
memory.
Delete the received
fax data in the
memory to secure
memory. Call for
service.
Close the finisher
until it locks into
place.
Turn the machine off
and reinstall the
finisher again. Check
that the finisher cable
is connected
properly. If the
problem persists,
please call for
service.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Install the fuser unit.
Call for service.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.