Printing A Report - Samsung CLX-8380ND User Manual

Printing a report

You can print a report on the machine's configuration or font list, etcetera.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, then enter
password and press OK.
3 Press the Print/Report tab.
Option
Print
Accounting Supplies
Reports Information
Network Auth.
Log Report
Usage Page
Report
Accounting
Reports
Description
You can print Network
Configuration, PS3 Font List, PCL
Font List and Schedule Jobs
Report. Schedule Jobs Report
shows the job list in pending, in
waiting, in delayed faxing or the
Mailbox list as well.
You can print the amount of each
category that your machine has
printed so far.
It displays user login IDs and emails.
You can print the report on the
amount of printouts depending on the
paper size and type.
Prints the report of printing out count
for each login user. This is used only
when network authentication in
enabled with SyncThru Web
Service. (Page 11.9)
Option
Report Configuration
Report
Fax Report
Report E-mail
Confirmation
(Continue)
Report
Scan to Server
Confirmation
Note
You can also print machine's status information and browse
status with SyncThru Web Service. Open the web browser on
your networked computer and type the IP address of your
machine. When SyncThru Web Service opens, click
Information > Print information.
10.9
<Machine status and advanced setup>
Description
You can print a report on the
machine's overall configuration.
You can set to print the information of
a fax reports.
• Multi Send Report: When you fax
to several destination, set this
option to print a transmission report.
On is to print every time you send a
fax, the machine prints a
confirmation report. With On-Error,
only when the transmission error
occurred, the report will be printed
out.
• Fax Send Report Appearance:
You can select whether the image
on the confirmation report shows or
not.
• Fax Sent/Received Report: The
machine stores the logs on each
transmission and prints out every
50 logs with this option On. It you
select Off, the machine stores the
logs but does not print.
• Fax Send Report: The machine
prints the confirmation report after
each fax job, only when you send a
fax to one destination.
The report shows the job of scanning
and sending it via Scan to Email.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
The report shows the job of scanning
and sending it via SMB and FTP.
• On: The report is printed whether a
job successfully completed or
failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.