Specifications - Samson MDR6 Owner's Manual

Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main
Line to Main
Aux Return to Main
Line to Aux Send
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF)
Mic/Line to Main (Mono Ch)
Line to Main (Stereo Ch)
Line to Aux Send
Equivalent Input Noise ("A" filter on, input shorted)
Mic
Line
Maximum Voltage Gain
Mic to Main
Line to Main (Mono Ch)
Line/Tape to Main (Stereo Ch)
Aux Return to Main
Mic to Aux Send
Line to Aux Send (Stereo Ch)
Residual Noise (30 kHz LPF, all control Min)
Main
Aux Send
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch
Input vs. Output
Peak LED Sensitivity (before clipping)
CLIP Indicators
Headphone output (600 ohm load)
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono"Ch)
Line Input (Stereo Ch)
Input Channel Equalizer (± 2dB)
High (shelving)
Mid (peaking)
Low (shelving)
Meters
Phantom Power
Power Requirement
Power Consumption
Dimensions (W x D x H)
Weight
MDR6 Specifications
5 Hz - 54 kHz
5 Hz - 54 kHz
5 Hz - 98 kHz
5 Hz - 57 kHz
0.0%
0.02%
0.02%
-128 dB
-104 dB
74 dB
56 dB
34 dB
20 dB
74 dB
34 dB
-89 dBu
-86 dBu
75 dB
87.5 dB
5 dB
Turn on: THD> 0.1%
100 mW
10.5 dBu
7.6 dBu
12 kHz ±15 dB
2.5 kHz ± 15 dB
80 Hz ±15 dB
6 POINT LED METERS (-20, -12, -6, 0, +6dB and
PEAK)
+48V
110V-240V, 50/60Hz
19 watts
9" x 10 3/4" x 3 1/2"
(229mm) x (273 mm) x (89mm)
4.5 lbs. (2.1 kg)
67