Specifications - Samson S4000 Owner's Manual

Specifications

Rated Output power
Frequency response
Total Harmonic Distortion
(Average,RS+150Ω)
(with 22Hz~22KHz BPF)
Maximum Voltage Gain
Crosstalk 1KHz
Input Channel Equalization
Mono Channel
Stereo Channel
Meters
Graphic Equalizer
Internal DSP Effects
Phantom Power
CLIP Indicators
Foot Switch
Power Requirement
Power Consumption
Weight
Dimensions (without cover)
S4000 • Powered Mixer
2 X 500W at 4Ω @0.1% THD at 1KHz
20Hz~20KHz+/-0.7dB@1W Output into 8Ω (AMP OUT)
20 Hz~20KHz+/-0.4@+4dB Output into 10kΩ (MAIN OUT, AUX OUT,
AUX SEND, EFX OUT)
Less than 0.06%@20Hz~20KHz, 75W output into4Ω (AMP OUT)
Less than 0.1%@20 Hz~20KHz+14dB output into 10KΩ (MAIN OUT,
AUX OUT, AUX SEND, EFX OUT)
HUM & Noise -124dB equivalent input noise
-100dB residual output noise (MAIN OUT, MONITOR OUT, EFX OUT)
-70dB (MAIN OUT, AUX OUT) Master level control at maximum, all
channel level control at minimum.
-70dB (EFX OUT) Master level control at maximum, all channel level
controls at minimum
99dB CH IN (MIC) to AMP OUT
74dB CH IN (MIC) to MAIN OUT, MONITOR OUT
70dB CH IN (MIC) to AUX 2 OUT
52.2dB CH IN (MIC) to REC OUT
54dB CH IN (LINE) to MAIN OUT, MONITOR OUT
16dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
70dB adjacent input, 70dB input to output
HF: 12KHz shelving (+/- 15dB Maximum)
MF: variable 100 Hz to 8kHz peaking (+/- 15dB Maximum)
LF: 80Hz shelving (+/- 15dB Maximum)
HF: 12KHz shelving (+/- 15dB Maximum)
MF: 2.5KHz peaking (+/- 15dB Maximum)
LF:80Hz shelving (+/- 15dB Maximum)
11 point LED meters
9 bands (63, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz)
24 BIT
+48V
Turn on: THD> 0.1%
Digital Effects Mute On/Off
120V/60 Hz, 240V/50Hz (Country Specific)
2100W,MAX.
50.6 lbs./23.5Kg
21 1/2" (W)x 6 1/4" (H) x 21" (D)
622mm (W)x 159mm(H) x 533mm (D)
Specifications are subject to change without notice
29