6.5
Removing and installing dispenser
6.5.1
Removal
Wear
protective
►
Unscrew the outer door
►
Leave top basket in the appliance and close the door
►
Remove the electrical connections
►
Using a screwdriver, lift the retention plates (A) stamped out of the
inner door off the catches (B).
►
Press the released dispenser inwards
6.5.2
Installation
►
Align retention plates (A) towards the centre so that all catches (B)
lock securely into position
►
Before installing the seal, lubricate with washing-up liquid
►
Press dispenser outwards into the inner door
►
Ensure that all retention plates (A) are firmly attached again
►
Attach electrical connections
►
Screw on the outer door
815_58300000003806_ara_en_e.doc – 30.01.12
gloves; risk of cuts.
Seite 40 von 67