Connecting Cables - Eizo RadiForce GX560 Instructions For Use Manual

2-2. Connecting Cables

Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, refer to "4-2. Compatible Resolutions" (page 21) to
change the PC settings for resolution and vertical scan frequency to those that are available for this monitor,
before connecting the PC.
1.
Turn the monitor screen 90° clockwise.
The monitor is installed in landscape orientation before shipment.
Attention
• Before turning the monitor screen, raise the monitor to its highest position.
2.
Connect signal cables.
Check the shapes of the connectors, and connect the cables. After connecting the DVI cable, tighten
the fasteners to secure the connector.
Attention
• The monitor has two types of DisplayPort connectors: input and output. When connecting the monitor to a
PC, connect the cable to the input connector.
• When using a daisy-chain connection, connect the cable to the input connector
• When connecting to multiple PCs, switch the input signal. For details, refer to the Installation Manual (on the
CD-ROM).
Signal cable: PP300
Signal cable: DD300DL
(optional)
or
.
Chapter 2 Installation / Connection
15