Table of Contents
Advertisement
2.3
Settings and Connecting
2.3.1
ISP settings
Please
collect
TM
SAGEM F@st
•
ISP account user name and password,
•
Protocol, encapsulation and VPI/VCI circuit numbers,
•
DNS server address,
•
IP address, subnet mask and default gateway (for fixed IP users only).
2.3.2
Install the SAGEM F@st
The SAGEM F@st
office or home. No special wiring or cooling requirements are needed. You should, however,
comply with the following guidelines:
•
Keep the SAGEM F@st
•
Do not place the SAGEM F@st
You should also remember to turn off the power, remove the power cord from the outlet, and
keep your hands dry when you install the SAGEM F@st
2.3.3
Connect the ADSL Line
Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to the ADSL port on your
Sagem SAGEM F@st
the plug clicks into position to ensure that it is properly seated.
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E
Page 2-7
the
following
information
1500
:
ADSL Router
TM
1500 ADSL Router can be positioned at any convenient location in your
TM
1500 ADSL Router away from any heating devices.
TM
1500 ADSL Router in a dusty or wet environment.
TM
1500 Router. When inserting an ADSL RJ-11 plug, be sure the tab on
2 - Description and physical installation
from
your
ISP
TM
1500 ADSL Router
TM
1500 ADSL Router.
before
setting
up
E
E
E
the
Advertisement
Table of Contents
