Table of Contents
Advertisement
4 - Configuring the SAGEM F@st™ 1500 ADSL router
4.2.3
WEP
To make your wireless network safe, you should turn on the security function.
Parameter
WEP module function
WEP Mode
Key Entry Method
To validate the WEP security protection, you should to set the same parameters for the
SAGEM F@st™ 1500 ADSL Router and all your wireless clients.
You may automatically generate encryption keys or manually enter the keys. To generate the
key automatically with passphrase, check the Passphrase box, enter a string of characters.
Select the default key from the drop down menu. Click "Next ".
The passphrase can consist of up to 32 alphanumeric characters. To manually
configure the encryption key, enter five hexadecimal pairs of digits for each 64-bit
key, or enter 13 pairs for the single 128-bit key (A hexadecimal digit is a number
or letter in the range 0-9 or A-F.). Note that WEP protects data transmitted
between wireless nodes, but does not protect any transmissions over your wired
network or over the Internet.
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E
Page 4-8
Description
Select Disable or Enable key to use or not WEP module function.
Remark: It is advised to select the Enable key.
Select 64 bit or 128 bit key to use for encryption.
Select Hex or ASCII key to use a Key Entry Method (Hexadecimal or
ASCII).
E
E
E
Advertisement
Table of Contents
