Channel And Ssid - Sagem F@ST 1500 Reference Manual

Ieee 802.11g adsl router
Hide thumbs Also See for F@ST 1500:
Table of Contents

Advertisement

Once the ADSL Router has been connected to the Internet, you get the following message:
4.2.2

Channel and SSID

Now, you can start the wireless configuration.
You must specify a common radio channel and SSID (Service Set ID) to be used by the
SAGEM F@st™ 1500
clients to the same values.
Parameter
ESSID
ESSID Broadcast
Wireless Mode
Channel
Reproduction and communication prohibited without the written permission of E
4 - Configuring the SAGEM F@st™ 1500 ADSL router
and all of its wireless clients. Be sure you configure all of its
ADSL Router
Description
Extended Service Set ID. The ESSID must be the same on the SAGEM
F@st™ 1500 ADSL Router and all of its wireless clients.
Enable or disable the broadcasting of the SSID.
This device supports both 802.11g and 802.11b wireless networks. Make
your selection depending on the type of wireless network that you have.
The radio channel used by the wireless router and its clients to
communicate with each other. This channel number must be the same
on the ADSL Router and all of its wireless clients.
SAGEM F@st™ 1500 Reference Manual - 288053220-03
E
E
E
Page 4-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

F@st 1500wg

Table of Contents