www.seagate.com
2.2
Formatted capacity
Model
ST6000VE001
ST4000VE001
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of
guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support of
drives with capacities over 137GB.
2.3
Recording and interface technology
Interface
Recording method
Recording density (kFCI)
Track density (ktracks/inch avg)
2
Areal density (Gb/in
)
Internal data transfer rate (Mb/s max)
Maximum sustained data transfer rate, OD read (MB/s)
I/O data-transfer rate (MB/s max)
2.4
Start/stop times
The start/stop times listed below.
Power-on to ready (sec) (typ/max)
Standby to ready (sec) (typ/max)
Ready to spindle stop (sec) (typ/max)
Time-to-ready may be longer than normal if the drive power is removed without going through normal OS powerdown procedures.
Seagate SkyHawk AI Product Manual, Rev. B
Formatted
capacity*
6000GB
4000GB
25/30
25/30
10/11
Guaranteed
sectors
11,721,045,168
7,814,037,168
All model
SATA
Perpendicular
1941
340
642
2347
226
600
Drive Specifications
Bytes per sector
4096
(emulated at 512-byte sectors)
s.
9