Table of Contents
Advertisement
www.seagate.com
2.0
Drive Specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models:
ST6000VE001
ST4000VE001
2.1
Specification summary tables
Table 1
The specifications listed in
appropriate section of this manual.
Table 1
Drive specifications summary for 6TB and 5TB models
Drive Specification
Formatted capacity (512 bytes/sector)*
Guaranteed sectors
Heads
Disks
Bytes per sector
(4K physical emulated at 512-byte sectors)
Default sectors per track
Default read/write heads
Default cylinders
Recording density (max)
Track density (avg)
Areal density (avg)
Internal data transfer rate (max)
Maximum sustained data rate, OD read (MB/s)
I/O data-transfer rate (max)
ATA data-transfer modes supported
Cache buffer
Weight (typical)
Average latency
Startup current (max) 12V
Voltage tolerance (including noise)
Non-Operating (Ambient °C)
Operating ambient temperature (min °C)
Operating temperature (Drive case max °C)
Temperature gradient
Relative humidity
Relative humidity gradient (max)
Wet bulb temperature (max)
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Seagate SkyHawk AI Product Manual, Rev. B
are for quick reference. For details on specification measurement or definition, refer to the
ST6000VE001
6000GB (6TB)
11,721,045,168
ST4000VE001
10
5
4096
63
16
16,383
1941kFCI
340ktracks/in
642Gb/in2
2347Mb/s
226MB/s
600MB/s
PIO modes: 0 to 4
Multiword DMA modes: 0 to 2
Ultra DMA modes 0 to 6
256MB
705g / 1.55 lb
4.0ms
1.8A
5V: ±5%
12V: ±10%
–40° to 70
5
†
70
20°C per hour max (operating)
30°C per hour max (nonoperating)
5% to 90% (operating)
5% to 95% (nonoperating)
30% per hour
26°C max (operating)
29°C max (nonoperating)
–304m to 3048m
(–1000 ft to 10,000 ft)
–304m to12,192m
(–1000ft to 40,000+ ft)
Drive Specifications
4000GB (4TB)
7,814,037,168
7
Advertisement
Table of Contents
