Using The Control Module; Method Setup - Gc - Agilent Technologies 5890 Manual

3 Using the control module

3 Using the control module

3.6 Method Setup - GC

Use the From GC button to download current method parameters from
Agilent 5890 (and save it under suitable name). You can use this
procedure to copy the parameters of your methods already stored in the
GC memory to Clarity.
Use the GC Status button to see the current GC configuration (inlets,
detectors etc.)
Note: Note: in DEMO mode it enables selecting them
Use the upper tabs in the
GC control parameters.
Note:
On the
output Signals.
Fig 6: Method Setup - GC - Oven/Zones
The Time Events
Signals tab, you can assign the Detector (or other signal) to the
Method Setup - GC
tab is available for Agilent 5890 Series II only.
- 10 -
Clarity Control Module
dialog to set or modify the