Option Screens - Graco ProMix 2KS Operation Manuals

Setup Mode

Option Screens

NOTE: See F . 21 on page 30 for a map of the Option
IG
Screens. Detailed screen descriptions follow.
NOTE: Each screen displays the current screen number
and the total number of screens in the group.
Option Screen 1
F . 29. Option Screen 1
IG
Flush Volume Check
This field only appears if Solvent Monitor is set to
"Meter" in Configure Screen 5, page 33.
If set to "On", Minimum Flush Volume will appear in
Recipe Setup Screen 2, page 41.
Flush and Fill Input
If set to "Global", Color/Catalyst Purge and Color/Cata-
lyst Fill are added to Advanced Setup Screen 1, page
37. Advanced Setup Screen 2, 3, and 5 are added.
See pages 37-39.
If set to "Recipe", Color/Catalyst Purge and Color/Cata-
lyst Fill are added to Recipe Setup Screen 2, page 41.
Recipe Setup Screen 3, 4, and 7 are added. See
pages 42-44.
K-factor Input
Global mode is useful when the material properties,
flush and fill characteristics, or K-factors are the same
for all materials used by the system.
If set to "Global," Advanced Setup Screen 4, page 38
is added.
If set to "Recipe," Recipe Setup Screen 5, page 43, is
added.
34
Minimum Material Fill Volume
Enter 0-9999 cc.
Verification Screen
F . 30. Verification Screen
IG
Verification
This screen appears if Flush and Fill Input or K-factor
Input are changed from "Recipe" to "Global" in Option
Screen 1.
312776K