Alarms Screens; Level Control Screen - Graco ProMix 2KS Operation Manuals

Run Mode Screens

Alarms Screens

F . 14. Alarms Screen
IG
Two screens show the last 10 alarms. Use the Up
Down keys to scroll between the two screens.
See Table 10 on page 82 for a list of alarm codes.

Level Control Screen

F . 15. Level Control Screen
IG
This screen shows the current volume for each fluid.
Adjust the current volumes on this screen, or use the tab
to go to Usage (Totals Screen, page 25). The Alarm
Level values may be adjusted using the advanced web
interface.
See F . 16. If the tank volume reaches the low-level
IG
threshold, the EasyKey screen will display the Tank
Level Low alarm and prompt the user to do one of the
following:
1. Refill tank volume to clear the alarm.
2. Resume mixing by selecting "Spray 25% of Remain-
der." If this selection is chosen, a second alarm will
26
occur after 25% of the remaining volume is mixed.
Refill tank volume to clear the alarm.
F . 16. Tank Level Low Screen (Tank A Shown)
IG
or
312776K