Setup Mode
Password Screen
If a password has been activated (see Configure
Screen 1, page 31), the Password screen will appear.
You must enter the password to access the Set Up
Home Screen. Entering the wrong password returns the
display to the Status Screen.
NOTE: If you forget the password, you can reset the
password (to 0), using the ProMix 2KS Web Interface
(see manual 313386).
F
. 18. Password Screen
IG
NOTE: If a password is activated, Setup Locked dis-
plays momentarily after exiting Setup mode and return-
ing to the Status Screen. A lock
on the Status Screen.
F
. 19. Setup Locked Screen
IG
28
Set Up Home Screen
F
IG
This screen displays when you enter Setup mode. From
it you can go to Recipe and Advanced Setup Screens
(pages 36-44) or System Configuration Screens
(pages 30-33). Press the Enter
selected screen set.
The screen also displays software versions and internet
addresses of various components. The values shown in
F
IG
See Table 4 for further information.
symbol appears
. 20. Set Up Home Screen
. 20 are only examples and may vary on your screen.
key to go to the
312776K