Booth Control - Graco ProMix 2KS Operation Manuals

Booth Control

Used by the operator for daily painting functions includ-
ing: changing recipes, signalling job complete, read-
ing/clearing alarms, and placing the system in Standby,
Mix, or Purge mode. It is typically mounted inside the
booth or near the painter.
Table 2: Booth Control Key and Indicator Functions
(see F
Key/Indicator Definition and Function
Display • Displays recipe number in Run
mode.
• If an alarm occurs, displays the
alarm code (E1 to E28) and red
Alarm indicator blinks.
• Recipe number displays after
alarm is reset.
• If Solvent Push is on, display alter-
nately shows dashes and the per-
centage remaining (see page 65).
Recipe • Green LED stays lit while a recipe
Indicator is in use.
• LED shuts off when Up
Down
alarm occurs.
• LED blinks while a new recipe is
loading and turns solid after load-
ing is complete.
• LED blinks when purging.
• Select a new recipe by pressing
Up
pressing Enter
Alarm Reset • Red LED blinks when an alarm
Key and occurs.
Indicator • Press key to reset alarm. LED
shuts off after alarm is reset.
Job Complete • Signals that job is complete, and
Key and resets A and B totalizers.
Indicator • Green LED blinks once after key is
pressed.
Enter Key Enters selected recipe and starts color
change sequence.
312776K
. 4)
IG
or
keys are pressed or if an
or Down keys, then
.
Table 2: Booth Control Key and Indicator Functions
(see F
Key/Indicator Definition and Function
Up Key Scrolls recipe numbers up.
Down Key Scrolls recipe numbers down.
Mix Mode Key • Starts Mix mode.
• Green LED remains lit while in Mix
mode or in Idle mode.
• Press and hold for 5 seconds to
turn on the Solvent Push feature.
Standby • Starts Standby mode.
Mode Key • Green LED remains lit while in
Standby mode.
Purge Mode • Starts Purge mode.
Key • Green LED remains lit while in
Purge mode.
Alarm Indicator (red)
Recipe Indicator (green)
. 4. Booth Control (see Table 2)
F
IG
Booth Control
. 4)
IG
Display
TI11614A
19