Humminbird 1158c Combo Installation And Operation Manual page 102

Recording and Playback
The Recording feature records active sonar information. When the recording is played back, the
views that were active during the recording are available in Playback. The Recording and
Playback feature is available when an optional-purchase SD card is installed and Screen
Snapshot is On (see Accessories Menu Tab: Screen Snapshot). Saved Recordings can be played
back from the Snapshot and Recording View.
From Snapshot and Recording View, select Start
1
Recording from the X-Press™ Menu
2 Slider Bar
Notes about Recording:
• While recording, press the EXIT key to exit the Snapshot and Recording X-Press™ Menu
and scroll to a different view. Recording will continue.
• The slider bar at the bottom of the Snapshot and Recording View shows the recording
progress and remaining space on the SD card.
• Pings Per Second: For maximum performance, keep the Pings Per Second setting on Auto
(see Snapshot and Recording X-Press™ Menu).
• Viewing saved Screen Snapshots and Recording Playback are not available while in
recording mode.
Views
Start recording:
1
1. From the Snapshot and Recording View, press
2. Highlight Start Recording, and press the RIGHT
2
Stop recording:
1. In any view, press the MENU key once to open
2. Highlight Stop Recording and press the RIGHT
the MENU key once to open the Snapshot and
Recording X-Press™ Menu.
Cursor key. A waypoint will also be created at
the boat location, and the recording shares the
same file name (.SON).
the Snapshot and Recording X-Press™ Menu.
Cursor key.
90