Features; Product Specifications - Ryobi DP102L Operator's Manual

PRODUCT SPECIFICATIONS

Chuck ........................................................................ 1/2 in.
Input ............................... 120 Volt, 60Hz, AC Only, 3 Amps
Motor ........................................................ 1/4 HP Induction
No Load Speed ......................................... 570–3,050 RPM
Swing.......................................................................... 10 in.
WORKLIGHT

FEATURES

LASER ON/OFF
SWITCH
WORKLIGHT
ON/OFF
SWITCH
SWITCH KEY
POWER
SWITCH
CHUCK
TABLE
LASER
BEVEL SCALE
Spindle Travel .........................................................2-3/8 in.
Table Size ........................................... 9-1/4 in. x 8-3/16 in.
Table Movement ...............................45° bevel, 360° swivel
Overall Height............................................................. 29 in.
Net Weight................................................................ 62 lbs.
DEPTH
GAUGE
BASE
10
LOCK KNOB
FEED
HANDLE
TABLE
ADJUSTMENT
HANDLE
VISE
Fig. 2