Lincoln Electric POWER FEED 84 SINGLE Operator's Manual page 67

POWER FEED 84, POWER FEED 84 DUAL
Parameter
P.28 Display Workpoint as Amps Option
This option determines how workpoint is displayed.
False = The workpoint is displayed in the format defined in the weld set (default).
True = All workpoint values are displayed as an amperage.
Note: This option may not be available on all machines. The power source must support this functionality,
or this option will not appear in the menu.
P.37 USB Options - Load User Mems & P-Nums from USB
Allows operator to scroll through files on a mounted USB drive in the "\Lincoln\Memories" folder, if files
exist in that folder. The operator can then choose a file, and if it is a valid memory set file, the UI will then
prompt the operator what data to load. There will be three options:
(1) Load All - this will load the User Memories and P-Numbers stored in the backup file.
(2) Load Mems Only - this will load only the User Memories stored in the backup file.
(3) Load P-Nums Only - this will load only the P-Numbers stored in the backup file.
The operator will be informed of success or failure of the load by a message on the User Interface.
If the feeder is single-head, and the backup file is from a dual-head feeder, the User Memories from
Head 1 of the backup file will be loaded to the feeder.
If the feeder is dual-head, and the backup file is from a single-head feeder, the User Memories from the
backup file will be loaded to Head 1 of the feeder.
Note: This option will only appear in the menu if (1) a USB module is in the same group as the UI and (2)
a USB drive has been plugged into the USB port and was properly mounted.
USB Options - Save User Mems & P-Nums to USB
Allows operator to save the User Memories and P-Number settings to a mounted USB drive. The file
name will be automatically generated and saved into the "Lincoln\Memories" folder on the USB drive. If
the directory does not exist, it will be created.
The name of the backup file that is created will be displayed on the UI as the save is in progress. The
operator will will be informed of success or failure of the save by a message on the User Interface.
Note: This option will only appear in the menu if (1) a USB module is in the same group as the UI and (2)
a USB drive has been plugged into the USB port and was properly mounted.
USB Options - Create USB Key
This option creates a unique USB Key and saves it to the USB drive that is plugged into the system. The key
is saved to the "\Lincoln\Keys" directory on the USB drive. The directory will be created if it does not exist.
The key file that is created will allow the operator to unlock *only* that feeder with *only* that USB drive.
If the drive is plugged into another feeder, the newly created key will not be valid on that feeder. Also, if
the newly created key file is placed onto another USB drive, the key will no longer be valid.
A USB drive can have multiple keys for multiple feeders. This option will not overwrite any existing keys,
it will only create new keys. All keys will be stored in the "Lincoln\Keys" directory.
Note: This option will only appear in the menu if (1) a USB module is in the same group as the UI and (2)
a USB drive has been plugged into the USB port and was properly mounted.
USER DEFINED PARAMETERS
Name and Description
B-31
OPERATION
Range
False, True
Load
Mems/P-Nums
Save
Mems/P-Nums
Create
USB Key