Section 4 − Specifications; Serial Number And Rating Label Location; Specifications; Included With Your Unit - Miller DIVERSION 165 Owner's Manual

4-1. Serial Number And Rating Label Location

The serial number and rating information for the power source is located on the rear of the machine. Use the rating labels to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.

4-2. Specifications

.
Do not use information in unit specifications table to determine electrical service requirements. See Sections 5-4, 5-5, 5-7, and 5-9 for information
on connecting input power.
.
This equipment will deliver rated output at an ambient air temperature up to 1045 F ( 405 C).
Welding Amperage
Range
Input Power
115 VAC
10 − 125
230 VAC 10 − 180
* () While idling.
230 VAC 10 − 165
* () While idling.

4-3. Included with Your Unit

6
5
OM-263920 Page 10
.
A complete Parts List is available at www.MillerWelds.com
SECTION 4 − SPECIFICATIONS
Diversion 180
Rated Output
60 A at 12.4 V, 100% Duty Cycle
125 A at 15 V, 35% Duty Cycle
60 A at 12.4 V, 100% Duty Cycle
150 A at 16 V, 20% Duty Cycle
180 A at 17.2 V, 10% Duty Cycle
Diversion 165
60 A at 12.4 V, 100% Duty Cycle
150 A at 16 V, 20% Duty Cycle
165 A at 16.6 V, 15% Duty Cycle
1
4
Amps Input At
Rated Output
11.3 (.88)* 1.3 - (.1)*
26.5 (.88)* 3.1 (.1)*
5.6 (.44)* 1.3 (.1)*
16 (.44)* 3.7 (.1)*
20 (.44)* 4.7 (.1)*
8 (.20)* 1.8 (.04)*
23 (.20)* 5.3 (.04)*
25.5 (.20)* 5.9 (.04)*
2
3
KVA KW Max. OCV
1.2 - (.03)*
3.0 - (.03)*
1.2 - (.03)*
80 VDC
3.6 - (.03)*
4.6 - (.03)*
1.2 (.02)*
80 VDC
3.7 (.02)*
4.2 (.02)*
1 Welding Power Source
2 5 ft (1.5 m) Primary Cord
With Plug
3 Gas Hose
4 Gas Regulator
5 12 ft (3.7 m) Work Cable
With Clamp
6 Air-Cooled 150 Amp TIG
Torch with 12.5 ft (3.8 m)
Cable
.
Some assembly is required.
For options and accessories see
back of book or contact your dis-
tributor.
.
A Diversion 180 is illustrated
throughout this manual un-
less otherwise indicated.
805527-A