Troubleshooting - Midland CT2000 Instruction Manual

Troubleshooting

PROBLEM
The radio does not turn on
The display shows RX but the
radio does not receive
The keypad does not work
While you are communica-
ting with your group, you
receive interferences from
other groups
30 |
SOLUTION
Power supply cable disconnected or defective.
Check its status.
Fuse broken. Check the status of the fuses in
the radio and in your vehicle.
Verify the volume level is not too low!
Check that you have set the same CTCSS to-
nes and DCS codes of your group.
The keypad lock is activated
Change the CTCSS tone or DCS code of your
group
Midland CT2000 instruction guide