Acoustic Sound For The Secondary Frequency; Reset - Midland CT2000 Instruction Manual

• Enter the radio menu and follow this path:
MENUUtilitiesRadio SettingTX Inh
• Choose one of these options:
. Tx Enable: to enable the transmission
. Tx Inhibit: to disable the transmission.
• Select the desired mode and confirm with MENU or PTT.
• Exit the menu and return to stand-by mode by pressing FUN.
Note: The selected option can differ from frequency to channel mode and from
VFO A to VFO B.

Acoustic sound for the secondary frequency

If CT2000 is receiving a signal on the secondary frequency (sub-vfo) you will
be warned by an acoustic sound. The main frequency (or channel) on which
you are operating is indicated by AN arrow in the display.
On the secondary frequency or channel this icon does not appear.
• Enter the radio menu and follow this path:
MENUUtilitiesRadio SettingSub Ring
• Now make your selection:
. OFF: to disable the acoustic sound
. ON: to enable the acoustic sound
• Select the desired setting and confirm with MENU or PTT.
• Exit the menu and return to stand-by mode by pressing FUN.

Reset

• Access the radio menu and follow this path:
MENUUtilitiesRadio SettingReset
• Now choose between:
. Factory: to make a complete reset (settings and memories)
. Setup: to reset the settings only.
• Set the desired option and confirm by pushing MENU or PTT.
Midland CT2000 instruction guide | 29