Software Installation - Bosch LA3-VARI-B Installation Manual

30 en | Configuring the VARI
6.1.3

Software installation

The InstallShield Wizard will be launched automatically and the welcome screen will be
displayed:
Figure 6.1: Welcome screen VariControl InstallShield Wizard
Follow the instructions of the InstallShield Wizard. Also Readme information is displayed,
showing installation notes, folder locations, etc. This information is mainly of relevance to
experienced users who already have an earlier version of VariControl installed on the same
machine. After finishing installation of the VariControl software and before launching the
program, also the VARI DDA libraries should be installed, containing the directivity data for all
VARI array configurations. There are two setup executables for the VARI, the first one installs
the data for the VARI‑B, VARI‑B+E, and VARI‑B+E+E. The second setup executable installs the
data for the VARI‑BH, VARI‑BH+E, and VARI‑BH+E+E. These libraries are installed as programs
to be able to manage the default destination folders of the libraries and automatically clean up
old libraries in case of updates. During installation it is advised to use the default destination
folder (\[Program files folder]\Bosch\DDA libraries); if another folder is specified during the
installation, the VariControl Folder for DDA libraries should be adapted.
Notice!
Please be patient during installation of the DDA libraries. These libraries are very big and
contain thousands of folders and files. Depending on the type of PC, installation may take
several minutes.
To remove a library from the PC, use the Add or Remove Programs tool from the Windows
Control Panel.
2018.06 | V1.3 | Installation manual
VARI-directional array
Bosch Security Systems B.V.