Installation And Wiring - Bosch LB20-PC60EW-5D Installation Manual

LB20 EVAC Cabinet Loudspeaker Models
3

Installation and wiring

3.1 Installing the speaker
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the U-Bracket.
Consult an expert if you are unsure.
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for
!
the wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
Installing the U-Bracket
To install the U-bracket, do the following:
1.
2.
3.
Installing the speaker
To install the speaker, do the following:
1.
2.
3.
4.
Bosch Security Systems B.V.
Draw a level line.
Align screw holes on the level line.
Install two mounting screws to secure the U-Bracket to the wall.
Wire the speaker, as shown in the wiring section.
Insert the two screws (provided) into the U-Bracket mounting points.
Loosely tighten the two screws using the Allen wrench (provided).
Aim the speaker.
Tighten the two screws to secure the U-Bracket to the speaker.
Ensure the speaker is secured to the U-Bracket.
Installation manual
Installation and wiring | en
2017.09 | V.02 | F.01U.345.361
7