Applying And Saving The Settings - Bosch LA3-VARI-B Installation Manual

36 en | Configuring the VARI
6.4.4

Applying and saving the settings

When all the venue parameters have been entered, click the Apply button. This will transfer
the settings to the VARI unit.
To save the settings as a file in the PC, proceed as follows:
4
Figure 6.6: Save control parameters settings
1.
2.
3.
4.
5.
6.
6.4.5 Loading a previously saved settings file
It may be appropriate for multiple VARI speakers in an installation to have exactly the same
settings. In this case, a settings file, saved according to the procedure outlined above, may be
loaded into VariControl and the transferred to further loudspeakers.
Loading an *.ini file is straightforward and similar to the procedure for saving. From the
Control parameters window:
1.
2018.06 | V1.3 |
Click Save..., to open the Save control parameters settings window.
Note that it is possible to save a subset of the speaker's parameters, as well as the whole
set. If all the parameters are to be saved, ensure that all the checkboxes in the
Parameters pane are ticked.
Unless you have reason to do otherwise (see the Help files), ensure that Current preset
only is selected in the Preset options box in the Presets pane.
The File name box in the Settings file pane specifies the location in which the settings file
will be saved. The default folder is at C:\...\My Documents\Bosch\VariControl\Settings,
and the default filename is vari_default.ini. Installers will generally wish to save the
settings file(s) in a different location; clicking on the folder symbol to the right of the File
name box will open a standard Save As window. Navigate to the desired location and give
the file a name; Click Save. Note that VARI settings files have a *.ini filename extension.
Click OK.
– If the filename in the File name box has not been changed, a Warning dialogue box
appears asking for confirmation that the existing file should be overwritten. Click Yes
if this is the case.
An Info dialogue box appears, confirming the file saving details. Click OK if everything is
correct.
Proceed with section Mechanical installation, page 20 in case the VARI is not mechanical
mounted yet.
Click Load..., to open the Load control parameters settings window.
Installation manual
VARI-directional array
Bosch Security Systems B.V.