Pc Gui Software; Pc Requirements; Pc Gui Application Software Installation - Bosch PLENA matrix Operation Manual

16 en | Installation
5.4

PC GUI software

Configuration of the DSP matrix mixer / system (inputs, outputs, settings and controls) is
done by the PLENA matrix graphical user interface (GUI) PC software. Use the Amplifier PC
software GUI, when configuring the multi channel DSP amplifier. It is important to always use
the most up‑to‑date version of the PC GUI. Please check www.boschsecurity.com for the
latest software updates.
5.4.1

PC requirements

The Plena Matrix GUI configuration application software packages can be installed on any PC
running the Microsoft Windows XP SP3, Windows Vista, Windows 7 or Windows 8 (non RT)
operating system. Make sure that the PC is working correctly and free of viruses before
installing the GUI configuration software. Using embedded operating systems is not
recommended.
Notice!
Be sure that you use a user account with full Windows administration rights before starting
software installation.
5.4.2

PC GUI application software installation

The following instructions explain how to install the Bosch Plena Matrix GUI application
software onto your Windows PC.
1.
2.
Notice!
The installation may prompt you to install Microsoft .NET framework 4.0, this is required to be
able to run this GUI. Please follow the link provided onscreen to download and install before
proceeding.
See also
–
–
2013-06 | V1.0 |
Download the latest version of PC GUI software from the Bosch website:
www.boschsecurity.com.
– Follow the on‑screen instructions from the setup wizard.
– The installation process is started.
Click the finish button.
Connections, page 18
Configuration, page 23
Operation manual
PLENA matrix
Bosch Security Systems B.V.