LS1 Pendant Sphere Loudspeaker
5
Installation
To install the pendant speaker, do the following:
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems B.V.
Thread the cable into the coupler.
2
1
Adjust the pendant suspension cable length.
Place the pendant suspension cable over the ceiling support.
Thread the cable into the opposite side of the coupler.
Once the proper height adjustment has been made, put the cable tail through the
through hole of the coupler, and leave at least 10 cm (4 in) of length. The maximum audio
wire length is 3 m (10 ft).
Tighten the screw to secure the cable.
Pinch the two legs of the hanger bracket together.
Installation note
Installation | en
11
2018.06 | V.01 | F.01U.354.322