Main Menu; Input Source; Aspect Ratio - Runco Video Xtreme VX-2ix Owner's Operating Manual

Operation

Main Menu

Runco Video

Input Source

Aspect Ratio

Picture
Input Position
ISF Presets
Information
Calibration
Service
Input Source
Input Source
> Composite
S-Video 1
S-Video 2
Component SD
HD/RGB 1
HD/RGB 2
DVI 1
DVI 2
Aspect Ratio
Aspect Ratio
Anamorphic
Standard 4:3
Letterbox
VirtualWide
Cinema
Virtualwide 2.35
The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in the example at left, Composite
is the active source.
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a "
Anamorphic is selected.
The aspect ratio selection is automatically saved for each input and
Note
resolution.
30
" to its left; in the example at left,
Runco VX-2ix Owner's Operating Manual