Service - Runco Video Xtreme VX-2ix Owner's Operating Manual

Operation

Service

Service
Test Video
Input Names
Remote Control
Display Device
HD Format
Triggers
Miscellaneous
Resolution
System Reset
Restore Saved Settings
Input Names
Restore
Composite Composite
S-Video 1 S-Video 1
S-Video 2 S-Video 2
Component SD Component SD
HD/RGB 1 HD/RGB 1
HD/RGB 2 HD/RGB 2
DVI 1 DVI 1
DVI 2 DVI 2
Save
Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
You must enter a passcode to access the Service menu.
Note
Test Video: Select Test Video from the Service Menu to access the internal test patterns
on the VX-2ix. Four patterns are available, consisting of white/gray or colored bars.
Press MENU to exit test pattern mode.
Input Names: You can give each VX-2ix input a descriptive name. For example, you may
want to change the default input name to the type of source component connected to it:
"VCR," "DVD," "Laptop" et cetera. Composite, S-Video and Component SD input names
can be up to 12 characters long; the others can be up to eight characters long.
To edit an input name, select Input Names from the Service menu. Press
an input and press ENTER. Use the
to select a character to change. When you have finished editing the input name, press
MENU.
To restore the default input name, press
"Restore" column. Then, press ENTER.
To save input names so that they can be restored after a System Reset (described on
page 43), press repeatedly to highlight "Save." Then, press ENTER.
The
Note
from top to bottom in the right column. To highlight "Save," scroll
through both columns.
or buttons to change a character; press
repeatedly to highlight that input name in the
button takes you from top to bottom in the left column, then
40
or
Runco VX-2ix Owner's Operating Manual
to select
or