Dometic 9100 Installaiton Instructions page 6

PREPARE FOR INSTALLATION
FIG. 6
FRTA
1/4" - 20 x 3/4"
Hex Head Screw
Front
Channel
FIG. 7
Groove
Tongue
3.  IMPACT OR CRUSH HAZARD.
DO NOT set Top Casting BEHIND Tongue. Aw-
ning roller assembly is NOT properly restrained
and could become separated. Failure to obey
this warning could result in loss of property, seri-
ous injury or death.
FIG. 8
Top Casting
Top Mounting
Bracket
Back
Channel
Groove in
Top Casting
must slide
over tongue
in Main Arm
FIG. 9
4. Secure RH front channel to RH top casting us-
ing 1/4" - 20 x 3/4" hex head screw and 1/4" split
lock washer. See (FIG. 6).
5. Repeat step () for LH side. See (FIG. 10).
FIG. 10
LH End Cap
Top Casting
Front
Channel
6
YES
NO
Cotter Pin
1/4" - 20 x 3/4"
Hex Head Screw
FRTA