Advertisement
Quick Links
Advertisement
Related Manuals for Neilsen CT1764
Summary of Contents for Neilsen CT1764
-
Page 2: Ec Declaration Of Conformity
If your installation needs an extension, make sure it is equipped with an earth plug. Product description: 230V Demolition hammer 110V Demolition hammer Wearing of protection goggles advised Model: CT1763 Model: CT1764 Wearing of protection against noise advised Wearing of protective shoes advised ●EC-Machinery Directive 2006/42/EC Wearing of respiratory protection advised ●EC-Directive on electromagnetic compatibility(EMC)2004/108/EC... - Page 3 would risk electrocution or an explosion. Detect any live or metallic plugging in. Carrying power tools with your finger on the switch or parts before starting to work (for example, a live wire in a wall plugging in power tools that have the switch in invites accidents. with a metals detector) d) Remove any adjusting key or wrench before turning the power tool on .A 8.
-
Page 4: Safety Instructions
Always hold the tool 7) TECHINCAL CHARACTERISTICS firmly with both hands, with handles(A)and (B), while operating. CT1763 CT1764 It is sometimes necessary to apply force on the point of the drill spindle so that Power supply: 230V/50Hz 110V/60Hz... -
Page 5: Functional Description
used for appropriate conditions will reduce personal injuries. accidentally. c) Power tool plugs must match the outlet. Never modify the plug in any way. h) Store idle power tools out of the reach of children and do not allow Do not use any adapter plugs with earthed (grounded) power tools. persons unfamiliar with the power tool or these instructions to operate the Unmodified plugs and matching outlets will reduce risk of electric shock. -
Page 6: Maintenance
ASSEMBLY OPERATIN CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Chipping/Scaling/Demolitio Installing or remove bit Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the tool so that the tool will not bounce around, uncontrolled. - Page 7 When the resin insulating tip inside the carbon brush is exposed to contact the 4. After feeding oil, securely clamp the oil gauge. commutator, it will automatically shut off the motor. When this occurs, both Note: As an optional accessory, oil for the Electric Hammer (one liter) is sold carbon brushes should be replaced.