Operation - Comtech EF Data KPA080 Installation And Operation Manual

KPA080 Ku-Band Solid-State Power Amplifier
3.2

Operation

Local control of the SSPA is controlled by operator input commands initiated through the
six button keypad on the front panel. The keypad is the local operator's interface to
control, configure and monitor the status of the SSPA. Operator inputs and commands
entered into the keypad are displayed by the front panel, 24-character, 2-line LCD
display.
There are five operating functions:
Flow charts for selecting the commands, operating menus, and data inputs are shown in
Figure 3-1 through Figure 3-6.
Rev. 0
•
Configuration
•
Monitor Status
•
Current Faults
•
Stored Faults
•
Utility Functions
Operation
3-3