Senco RoofPro 445XP Operating Instructions Manual page 5

sAFEty WArNINgs
y y
Never use tool if workpiece con-
tact (safety element), trigger or
springs have become inoperable,
missing or damaged. Do not
tamper with or remove workpiece
contact (safety element), trigger,
or springs.
y y
Disconnect tool from air before
doing tool maintenance, clearing
a jammed fastener, leaving work
area, moving tool to another
location, or handing the tool to
another person.
y y
Make sure all screws and caps
are securely tightened at all
times. Make daily inspections
for free movement of trigger and
workpiece contact (safety ele-
ment). Never use the tool if parts
are missing or damaged.
y y
Store idle tools out of reach of mi-
nors and other untrained persons.
Tools are dangerous in the hands
of untrained users.
y y
Use only parts, fasteners, and ac-
cessories recommended or sold by
SENCO. Do not modify tool without
authorization from SENCO.
y y
Use only clean, dry, regulated
compressed air at recommended
pressure.
y y
Do not connect tools to air pressure
that potentially exceeds 200 psig
or 13.7 bar.
200 psig
13.7 bar
5