Starting Off With Hhc; Shifting, Riding - KTM 1290 SUPER ADVENTURE R 2017 Owner's Manual

10 RIDING INSTRUCTIONS
10.5

Starting off with HHC

10.6

Shifting, riding

Warning
Danger of accidents Abrupt load alterations can cause the vehicle to get out of control.
–
Avoid abrupt load alterations and sudden braking actions.
–
Adapt your speed to the road conditions.
Warning
Danger of accidents If you change down at high engine speed, the rear wheel blocks and the engine races.
–
Do not change into a low gear at high engine speed.
The HHC is an optional auxiliary function of the brake system.
The HHC prevents accidental rolling back of the motorcycle on hills.
The HHC recognizes stopping on hills and operates the rear brake.
After releasing the brake lever, the brake force is maintained for a maximum of 5 seconds
as long as the motorcycle is not moving forward.
When driving off the HHC releases the rear brake automatically.
Info
When the HHC is active, the TC light
When the ignition is switched on, the HHC can still be active, even if the engine is
402422-01
stopped.
To roll back with active HHC, wait 5 seconds, shift to neutral, or switch off the igni-
tion.
If the HHC does not detect a start off after 5 seconds, the braking force is automatically
reduced gently.
When a brake lever is actuated, the HHC is re-activated.
flashes
113