Plant Acceptance - Siemens SIMATIC PCS 7 Operating Manual

Changes, tracking changes, and acceptance

9.8 Plant acceptance

To print individual or multiple charts from the SIMATIC Manager, you must make the CFC
editor settings in the "Print" dialog. For this purpose, open a chart in CFC, go to the "Chart >
Print" menu, and then select the printout options shown below.
In the chart directory of your AS, within the SIMATIC Manager you then have the option of
highlighting charts for printing purposes, and printing the selected charts using the "File >
Print > Object Content" menu command.
9.8 Plant acceptance
Note
You can find information on acceptance of a plant, changes, or F block types in the
"SIMATIC Industrial Software S7 F/FH Systems - Configuring and Programming"
(https://support.industry.siemens.com/cs/ww/en/view/101509838) manual.
Two checklists are available for system documentation purposes:
● "Process Safety – Configuration" checklist
This list is used for documenting the system design and the software and hardware
settings of the automation system in use.
● "Process Safety – Verification/Testing"
This list enables you to document that the components in use have been tested against
their requirements and specifications, and that the relevant function tests have been
performed.
These lists are only templates and may be adapted to the requirements of your plant at any
time.
184
Compendium Part B - Process Safety (V8.2)
Operating Manual, 07/2016, A5E35031794-AB