New Matrix Operating Blocks - Siemens SIMATIC PCS 7 Operating Manual

Configuration with Safety Matrix

8.8 New matrix operating blocks

8.8 New matrix operating blocks
In order to use the Safety Matrix Viewer in a PCS 7 version from V7.1 or higher, the following
images have to be converted to the current WinCC version:
● @PG_F_MATCTL*
● @PG_F_MA_AL*
● @PG_F_SC_AL*
● @PG_F_SE_AL*
● @PCS7Typicals_S7FSMTX.PDL
The converted images should subsequently be stored in the root directory of the installation.
You can find this in the installation directory of the Siemens software under:
C:\...\Siemens\WinCC\Options\PDL\Faceplatedesigner_V6\
You can find further information in the section "Inserting the new safety matrix block icon in
the PCS 7 OS" in the "SIMATIC Industrial Software Safety Matrix"
(https://support.industry.siemens.com/cs/ww/en/view/100675874) manual.
172
Compendium Part B - Process Safety (V8.2)
Operating Manual, 07/2016, A5E35031794-AB