Siemens SIMATIC PCS 7 Operating Manual page 128

Configuring the safety program
7.10 Operating and changing safety-related parameters on a PCS 7 OS
Since the sections already contain entries for properties and attributes, you need to proceed
to the last line in each case. Start with the first unused number (in the example: last number
used = 10, first unused number = 11 = N), and increase the number for each entry.
[Columns]
...(existing entries)
ColumnN = SAFE_ID1
TypeN = 3
ColumnN+1 = SAFE_ID2
TypeN+1 = 3
ColumnN+2 = InitiatorAuthorization
TypeN+2 = 3
ColumnN+3 = ConfirmerAuthorization
TypeN+3 = 3
[Column00]
...(existing entries)
[ColumnN]
Property0 = SAFE_ID1
[ColumnN+1]
Property0 = SAFE_ID2
[ColumnN+2]
Property0 = InitiateChangeLevel
[ColumnN+3]
Property0 = ConfirmChangeLevel
Note
For more details on SDW, please refer to the "SIMATIC Industrial Software S7 F/FH
Systems – Configuring and Programming"
(https://support.industry.siemens.com/cs/ww/en/view/101509838) manual.
For more information on the structure of the @@PCS7Typicals.CFG file, refer to the WinCC
Information System (Start > Simatic > WinCC > WinCC Information System in the contents
under Options > Options for Process Control > Graphic Object Update Wizard > Structure of
the Configuration File).
128
Compendium Part B - Process Safety (V8.2)
Operating Manual, 07/2016, A5E35031794-AB