Table of Contents
Advertisement
Error Messages/Other Messages
Error messages
Indication:
MIDI Buffer Full
Situation:
Due to an inordinate volume of MIDI
messages received, the RD-700 has failed to
process them properly.
Action:
Reduce the amount of MIDI messages to be
transmitted.
Indication:
MIDI Communication Error
Situation:
A problem has occurred with the MIDI cable
connections.
Action:
Check that MIDI cables are not broken or
pulled out.
Indication:
BULK DUMP: Receive Data Error
Situation:
A MIDI message was received incorrectly.
Action:
If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the RD-
700.
Indication:
BULK DUMP: Check Sum Error
Situation:
There is a problem with the System Exclusive
message's Check Sum.
Action:
Check the value of the Check Sum.
Other Messages
Indication:
Now, Transmitting System Exclusive.
Situation:
Indicated when a Data Request message (RQ1)
is received.
Action:
The RD-700 outputs the requested data while
this message continues to be displayed.
Indication:
Now, writing Bulk Dump Data. Keep on
POWER!!
Situation:
Indicated when Bulk Dump data is being
received.
Action:
Once received, the data is written to the RD-
700's internal memory; be absolutely sure not
to turn off the power until "COMPLETED"
appears in the display.
Indication:
Unavailable while in Rec Mode
Situation:
This is displayed when the [MIDI TX] button is
pressed with Rec Mode "ON."
Action:
When Rec Mode is "ON," you cannot change
the MIDI TX settings. To make changes to the
MIDI TX settings, set Rec Mode to "OFF" (p.
97).
103
Advertisement
Table of Contents
