Error Messages/Other Messages - Roland HP103 Owner's Manual

Case
On an acoustic piano, notes in the upper one
and a half octaves of the keyboard continue to
sound until they decay naturally, regardless of
In the upper range,
the damper pedal. There is a difference in the
the sound changes
timbre as well. Roland pianos faithfully
abruptly beyond a
simulate such characteristics of the acoustic
certain key
piano. On the HP103, the range that is
unaffected by the damper pedal will change
depending on the Key Transpose setting.
When listening through headphones:
Some of the more flamboyant and
effervescent piano tones feature an ample
high-end component, which may make the
sound appear to have metallic
reverberation added. Since this
reverberation becomes particularly
A High-pitched
audible when supplemented by heavy
reverb, you may be able to diminish the
whine is produced
problem by reducing the amount of reverb
applied to the sound.
When listening through speakers:
Here, a different cause (such as resonance
produced by the HP103) would be suspect.
Consult your Roland dealer or nearest
Roland Service Center.

Error Messages/Other Messages

Display
USr
Usr.
S.
PU
dEL
E.32
E.41
_._._.
* Error messages are indicated by an "E." before the number. Press any button, and you can cancel the error message.
Cause/Remedy
User Song. Stores recorded performances (p. 31).
The "." in the display indicates that there is performance material already
recorded (p. 31).
Internal song number (p. 13).
This appears when a song with a pickup (a song that does not start on the first
beat) is played back.
This appears when you attempt to delete a recorded song (p. 30, p. 34).
The amount of performance information is too large, and further recording is
not possible.
A problem such as a loose MIDI cable occurred. Make sure the MIDI cables
are correctly hooked up.
V-LINK function is On (p. 38).
Error Messages/Other Messages
Case
When listening through speakers:
Playing at loud volumes may cause
instruments near the HP103 to resonate.
Resonation can also occur with fluorescent
light tubes, glass doors, and other objects.
In particular, this problem occurs more
easily when the bass component is
increased, and when the sound is played at
The bass range
higher volumes. Use the following
sounds odd, or
measures to suppress such resonance.
there is a vibrating
• Place speakers so they are 10–15 cm from
resonance
walls and other surfaces.
• Reduce the volume.
• Move the speakers away from any
resonating objects.
When listening through headphones:
Here, a different cause would be suspect.
Consult your Roland dealer or nearest
Roland Service Center.
The volume level of
Could you be using a connection cable that
the instrument
contains a resistor?
Use a connection cable that does not contain a
connected to Input
resistor.
jacks is too low
Meaning
Cause/Remedy
43