System - Roland MC-909 Owner's Manual

System

Here you can make settings that affect the entire system, such as
those for tuning and synchronization.
1. Press [MENU].
2. Press [CURSOR (up/down)] to select "System."
In Pattern mode/Song mode, you can also access this by
holding down [SHIFT] and pressing [F5 (System)].
fig.6-01
3. Press [ENTER].
The System menu will appear.
fig.6-02
4. Press [F1]–[F6] to select the item that you want to
set.
[F1 (Panel/Control)] Make settings for the panel control-
(Panel/Controller) lers and the screen.
[F2 (Seq/MIDI)] Make sequencer and MIDI-related
(Sequencer/MIDI) settings.
[F3 (Sound)] Specify the tuning and how the
sounds are to be produced.
[F4 (Sampling)] Make sampling-related settings.
[F5 (D Beam)] Make D Beam settings.
[F6 (System Info)] View the state of the MC-909.
(System Information)
5. Press a function button to make further selections.
126
6. Use [CURSOR (up/down)] to select a parameter.
7. Use [VALUE] or [INC/DEC] to edit the value.
* Settings made here will revert to their original value as soon as you
turn off the power. If you want to keep your settings, press [F6
(System Write)].
8. When you are finished making settings, press [EXIT].
You will return to the System menu.
9. Press [EXIT] once again to exit the System menu.