Using The Layer Screen - Roland Fantom-Xa Owner's Manual

Playing in Performance Mode

Using the LAYER Screen

Selecting a Part
The currently selected part is called the "current part."
1.
From the PERFORM LAYER screen, use
select the part.
fig.PartSelect
You can also select the part by pressing [SELECT] to make it
light and pressing PART/TRACK [1]–[8].
* To select parts 9–16, press [9-16] to make it light, and then press
PART/TRACK [1]–[8].
Selecting the Part that You want to
Sound (Keyboard Switch)
Here's how to select the parts whose patch or rhythm set will sound.
1.
From the PERFORM LAYER screen, Press [F1 (KBD SW)].
The Keyboard Switch window appears.
fig.KbdSw
2.
Press or to select the part you want to sound.
3.
Use the VALUE dial, [INC] [DEC], or
or "OFF."
When you play the keyboard, you will hear the current part and
the parts whose keyboard switch is set to "ON."
4.
Press [F6 (CLOSE)] to return to the previous screen.
About the keyboard switch
Use the keyboard switch when you want to play multiple
sounds layered together (Layer) or assign different sounds to
different regions of the keyboard (Split). Conversely, you can
turn off all keyboard switches when you are creating data, etc.
68
Selecting the Sound for a Part
It's easy to switch the patch assigned to a part.
1.
Select the part whose sound you want to switch.
2.
Press [F5 (PAT LIST)].
The PATCH LIST screen appears.
or to
fig.PatchListPfm
• If you press [F1 (FAVORIT)], the FAVORITE PATCH screen (p.
31) appears.
• If you press [F2 (CATEG)], you can select patches by category
(p. 32).
3.
Press
4.
Use the VALUE dial, [INC] [DEC], or
patch.
5.
Press [ENTER] to select the patch.
Using the PATCH SELECT screen
1.
Select the part whose sound you want to switch.
2.
Press [PATCH SELECT].
The PATCH SELECT screen appears.
fig.PatchSelectPfm
3.
To select a rhythm set, press [F5 (RHYTHM)] to add a check
to select "ON"
mark (✔).
If you add a mark, the RHYTHM SELECT screen appears.
4.
Press [F1] or [F2] to select a group.
5.
Use [F3], [F4], PART/TRACK [1]–[8], [INC] [DEC],
or the VALUE dial to select a patch/rhythm set.
6.
Press [ENTER] to return to the PERFORM LAYER screen.
to select the performance group.
to select a
,