Roland Fantom-Xa Owner's Manual page 136

Editing Songs
Erasing Unwanted Performance
Data (Erase)
This function erases all the sequencer data inside the specified area.
As the erased data is replaced by rests, the original measures will
remain.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.Erase
Parameter Value
Track/Pattern TRK ALL,
TRK 1–16,
TEMPO,
PTN001–100
TRK ALL: Phrase tracks 1–16, the beat track,
and the tempo track
TRK 1–16: Specified phrase track
TEMPO: Tempo track
PTN001–100: Specified pattern
Ch/Part ALL, Ch 1–16
ALL: Erases all sequencer data.
Ch 1–16: Erases sequencer data of one spe-
cific MIDI channel only.
* If you set "Track" to "TEMPO," or if "Status" is
set to "System Exclusive," "Tune Request" or
"Pattern Call," this parameter will not be avail-
able.
Measure 0001–
For 1–ALL
Status ALL, Note,
Poly Aftertouch,
Control Change,
Program Change,
Channel After-
touch, Pitch Bend,
System Exclusive,
Tune Request,
Pattern Call
When "Status" is "Note" or "Poly Aftertouch"
Range Min 0 (C -)–127 (G9)
Range Max
When "Status" is "Control Change"
Range Min 0–127
Range Max
When "Status" is "Program Change"
Range Min 1–128
Range Max
136
Explanation
Track(s) or pattern to be
erased
MIDI channel of the data
to be erased
Range of measures to be
erased
If you set "For" to
"ALL," all measures
will be specified.
Type of data to be erased
* If "Track" is set to
"TEMPO," this parame-
ter will not be available.
Range of note numbers to
be erased
You can also specify
the key range by press-
ing keys on the key-
board.
Range of controller num-
bers to be erased
Range of program num-
bers to be erased
Deleting Unwanted Measures
(Delete)
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
For details on the settings, refer to Basic Operation for Track
Editing (p. 133).
fig.Delete
Parameter Value
Track/Pattern TRK ALL,
TRK 1–16,
TEMPO,
PTN001–100
TRK ALL: Phrase tracks 1–16, the beat track,
and the tempo track
TRK 1–16: Specified phrase track
TEMPO: Tempo track
PTN001–100: Specified pattern
Measure 0001–
For 1–ALL
Explanation
Track(s) or pattern to be
deleted
Range of measures to be
deleted
If you set "For" to
"ALL," all measures will
be specified.