Playing In Performance Mode; Displaying Perform Layer Screen; Displaying Perform Mixer Screen; Functions In The Performance Layer/Mixer Screen - Roland Fantom-Xa Owner's Manual

Playing in Performance Mode

A performance contains settings that apply to each individual part,
such as the patch (rhythm set) assigned to each part, and its volume
and pan.
Broadly speaking, Performance mode consists of two screens:
LAYER screen and MIXER screen.
Use the LAYER screen when you want to combine multiple sounds
(patches or rhythm sets) to create complex sounds. This lets you play
patches together ("layer") or play different patches in separate areas
of the keyboard ("split").
Use the MIXER screen when you want to mix the sounds by
adjusting the level and pan for each of 16 parts.
When you play the keyboard, you will hear the current part and the
parts whose keyboard switch is set to "ON."
In addition to the settings of each part, the following settings can
also be stored for each performance.
• Controller settings such as the D Beam, realtime control knobs,
assignable switches, and pads
• Arpeggio and chord memory settings
• Rhythm group number
Displaying PERFORM LAYER
Screen
1.
Press PERFORMANCE [LAYER/SPLIT].
You will enter Performance mode, and the PERFORM LAYER
screen appears.
fig.PfmLayer
Displaying PERFORM MIXER
Screen
1.
Press PERFORMANCE [MIXER].
You will enter Performance mode, and the PERFORM MIXER
screen appears.
fig.PfmMixer
66
Functions in the
PERFORMANCE LAYER/
MIXER Screen
fig.PfmFunc.e
LAYER screen
1
2
7
1
Indicates the current sound generating mode.
Indicates multi-effects (MFX1, 2, 3), chorus (CHO),
2
reverb (REV), and masterring (MASTER) on and off.
Indicates the name of the currently selected song,
3
the measure location.
4
Indicates the time signature, and the tempo.
Indicates/selects the group, number,
5
and name of the selected performance.
6 Indicates the key range in which you can play the
keyboard or play rhythm sets.
7
Indicates the current part.
8
Jumps to the setting screen of the displayed parameter.
MIXER screen
1
2
5
7
1
Indicates the current sound generating mode.
Indicates multi-effects (MFX1, 2, 3), chorus (CHO),
2
reverb (REV), and masterring (MASTER) on and off.
Indicates the name of the currently selected song,
3
the measure location.
4
Indicates the time signature, and the tempo.
Indicates/selects the current part.
5
6
Indicates/selects the patch assigned to the current part.
Set the volume (LEVEL), pan (PAN), chorus (CHORUS),
7
reverb (REVERB), Part Course Tune (KEY SFT),
Keyboard Sw (KBD), Pad Part (PAD),
Arpeggio Part (ARP), Output Assign (OUT) of the part.
8
Jumps to the setting screen of the displayed parameter.
3
4
5
6
8
3
4
6
8