Roland Fantom-Xa Owner's Manual page 161

Parameter Value
Chorus Source PRF, P1–P16
12
Chorus Type 0–3
Reverb Source PRF, P1–P16
13
Reverb Type 0–5
MFX Output A, B
14
Assign
Chorus Out- MAIN, REV,
15
put Select M+R
Chorus Level 0–127
Chorus Out- A, B
put Assign
Reverb Level 0–127
16
Reverb Output A, B
Assign
Mastering Ef- 0–5
17
fect Type
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set's effects settings are selected,
those settings are shown in each of the performance's effects
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set effects parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 37, p.
57).
Explanation
Chorus parameter settings used by the performance
PRF: Performance settings
P1–P16: Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Selects either chorus or delay.
0 (OFF): Neither chorus or delay is used.
1 (CHORUS): Chorus is used.
2 (DELAY): Delay is used.
3 (GM2 CHO): General MIDI 2 chorus
Reverb parameter settings used by the performance
PRF: Performance settings
P1–P16: Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Type of reverb
0 (OFF): Reverb is not used.
1 (REVERB): Normal reverb
2 (SRV ROOM): Simulates typical room acoustic reflections.
3 (SRV HALL): Simulates typical concert hall acoustic reflections.
4 (SRV PLATE): Simulates a plate reverb, a popular type of artificial reverb unit that derives its
sound from the vibration of a metallic plate.
5 (GM2 REV): General MIDI 2 reverb
Output destination of the sound passed through the multi-effects
A: OUTPUT A (MIX) jacks in stereo
B: OUTPUT B jacks in stereo
* If the Mix/Parallel parameter is set to "MIX," all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 194).
* For some settings of MFX Structure, the sound that passes through the multi-effect will be sent to a dif-
ferent multi-effect, and the MFX Output Assign setting will be ignored.
Specifies how the sound routed through chorus will be output.
MAIN: Output to the OUTPUT jacks in stereo.
REV: Output to reverb in mono.
M+R: Output to the OUTPUT jacks in stereo, and to reverb in mono.
Volume of the sound passed through chorus
Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select
is set to "MAIN" or "M+R."
A: OUTPUT A (MIX) jacks in stereo
B: OUTPUT B jacks in stereo
* When Chorus Output Select is set to "REV," this setting will have no effect.
* If the Mix/Parallel parameter is set to "MIX," all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 194).
Volume of the sound passed through reverb
Specifies how the sound routed through reverb will be output.
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
Mastering effect settings
Adding Effects
161