Table of Contents
Advertisement
Playing in Performance Mode
A performance contains settings that apply to each individual part,
such as the patch (rhythm set) assigned to each part, and its volume
and pan.
Broadly speaking, Performance mode consists of two screens: Layer
screen and Mixer screen.
Use the Layer screen (p. 76) when you want to combine multiple
sounds (patches or rhythm sets) to create complex sounds. This lets
you play patches together ("layer") or play different patches in
separate areas of the keyboard ("split").
Use the Mixer screen (p. 76) when you want to mix the sounds by
adjusting the level and pan for each of 16 parts.
When you play the keyboard, you will hear the current part and the
parts that have a check mark.
In addition to the settings of each part, the following settings can
also be stored for each performance.
• Controller settings such as the D Beam, realtime control knobs,
assignable switches, and pads
• Arpeggio and chord memory settings
• Rhythm group number
76
Displaying Performance Layer
Screen
To access the Performance Layer screen, use the following
procedure.
1. Press PERFORMANCE [LAYER/SPLIT].
You will enter Performance mode, and the Layer screen appears.
fig.LAYER_50
Displaying Performance Mixer
Screen
To access the Performance Mixer screen, use the following
procedure.
1. Press PERFORMANCE [MIXER].
You will enter Performance mode, and the Mixer screen appears.
fig.MIXER_50
2. Press [6] to switch the page.
fig.MIXER2_50
Advertisement
Table of Contents
