Mix Level - Roland V-Bass VB-99 Owner's Manual

Roland v-bass system owner's manual
Hide thumbs Also See for V-Bass VB-99:
Table of Contents

Advertisement

COSM BASS
MIX
Parameter/
Explanation
Range
STRING PAN HiC, 1–4th, LowB
L0:100R–L100:0R
This sets the left/right pan of each string.
* The pan effect is cancelled if a monaural effect
or COSM amp is connected after the COSM
bass.
STRING LEVEL HiC, 1–4th, LowB
0–100
Specifies the output level of each string.

MIX LEVEL

COSM BASS
0–100
Specifies the level of the COSM bass.
NORMAL PU (Normal Pickup)
0–100
Adjusts the volume of the normal pickup.
NS (Noise Suppressor) *1
This effect reduces the noise and hum picked up by bass pickups.
Since it suppresses the noise in synchronization with the envelope of
the bass sound (the way in which the bass sound decays over time),
it has very little effect on the overall sound, and does not harm its the
natural character.
SW (Noise Suppressor Switch)
OFF, ON
Turns the NS effect on/off.
THRSH (Threshold)
0–100
Adjust this parameter as appropriate for the
volume of the noise. If the noise level is
high, a higher setting is appropriate. If the
noise level is low, a lower setting is appro-
priate. Adjust this value until the decay of
the bass sound is as natural as possible.
REL (Release)
0–100
Adjusts the amount of time from the point at
which application of the noise suppressor
begins to when the volume is fully attenuat-
ed.
*1
Setting available when MODLNG TYPE for COSM BASS is set
to E.BASS, AC BASS, or E.GTR.
Chapter 8 Parameters Guide
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-bass 04672434

Table of Contents