System Settings - Roland SP-555 Owner's Manual

To accomplish this
Rehearse pattern recording
Delete playback data
Exchange patterns between pads
Copy patterns between pads
Delete an individual pattern
Delete all patterns
Play/stop patterns in sync with external sequencer
(when MIDI synchronization mode is Auto Sync)
D-Beam controller operations
To accomplish this
D Beam Synth settings
D Beam Filter settings
D Beam Trigger settings
D Beam Sens setting

System settings

To accomplish this
Specify the blinking speed of the display illumination
Specify the MIDI channel
MIDI Thru setting
MIDI synchronization mode setting
MIDI synchronization source setting
Tx MIDI Sync setting
Initialize internal memory
Disable protect
Bank A–J protect
Bank A protect
Check the version number
Set the internal processing level
Roll Resolution setting
Pad Velocity setting
Pad Sens setting
Pedal Assign setting
Do this
While recording a pattern [SAMPLING]
While recording a pattern [DEL]
➜
[PATTERN SELECT] [DEL] + [SAMPLING]
➜
specify exchange-destination pad
➜
[PATTERN SELECT] [DEL] + [RESAMPLE]
➜
specify copy-destination pad
➜ ➜
[PATTERN SELECT] [DEL]
➜
[PATTERN SELECT] [CANCEL] + [DEL]
➜
[DEL]
➜
[PATTERN SELECT] [HOLD] + Pad [1]–[16]
Do this
[SYNTH] + Pad [1]–[8] (select a sound)
[SYNTH] + Pad [9]–[16] (select the Delay)
[SYNTH] + CTRL1 knob (specify the Key Shift)
[SYNTH] + CTRL2 knob (specify the Scale)
[SYNTH] + CTRL3 knob (specify the Level)
[FILTER] + Pad [1]/[5]/[7]/[13] (LPF)
[FILTER] + Pad [2]/[6]/[10]/[14] (HPF)
[FILTER] + Pad [3]/[7]/[11]/[15] (BPF)
[FILTER] + Pad [4] (NOTCH)
[TRIGGER] + Pad [1]–[16] (select a pad)
[TRIGGER] + CTRL3 knob (specify the Velocity)
[CANCEL] + [SYNTH]/[FILTER]/[TRIGGER]
Do this
➜
[TAP TEMPO] + Power On
[PATTERN SELECT] + Power On
[PATTERN SELECT] + Power On
➜
[TIME/BPM] + Power On Bank [A]
➜
[TIME/BPM] + Power On Bank [B]
➜
[TIME/BPM] + Power On Bank [C]
[CANCEL] + [DEL] + [REMAIN] + Power On
[CANCEL] + Power On
[REMAIN] + Power On
[REMAIN] + Bank [A] + Power On
[MARK] + Power On
[CANCEL] + [START/END/LEVEL] + CTRL3 knob
[ROLL] + CTRL3 knob
[FIXED VELOCITY] + CTRL3 knob
[CANCEL] + [FIXED VELOCITY]
➜
[CANCEL] + Pedal CTRL3 knob
"About the pedal" (p. 68))
➜
Pad [1]–[16]/[HOLD] (delete performances of all pads)
➜
specify exchange-source pad
➜
[SAMPLING]
➜
specify copy-source pad
➜
[SAMPLING]
➜
Pad [1]–[16] [DEL]
➜
Bank [A]–[B] (internal) /[C/G]–[F/J] (card)
➜
(start/stop the external sequencer)
➜ ➜
CTRL3 knob
➜
CTRL3 knob [SAMPLING]
➜ ➜ ➜
Bank [A] CTRL3 knob
➜ ➜ ➜
Bank [B] CTRL3 knob
➜ ➜
CTRL3 knob [SAMPLING]
➜ ➜
CTRL3 knob [SAMPLING]
➜ ➜
CTRL3 knob [SAMPLING]
➜
[SAMPLING]
➜ ➜
CTRL3 knob [SAMPLING]
➜
[SAMPLING] (for details on each setting, refer to
Appendix
[SAMPLING]
[SAMPLING]
[SAMPLING]
61