Roland SP-555 Owner's Manual page 60

Appendix
To accomplish this
Specify effect send for USB
Specify effect send for D Beam Synth
Effect send for current bank
Effect send for all samples
Effect assign mode
Check the previous effect
Set the parameters of the effect to use next
Effect limit mode
Effect knob control
Reset an effect's tempo synchronization to the tempo of
the synthesizer
Effect tempo mode
Call up an Effect Memory
Store an Effect Memory
Check the content of an Effect Memory
Loop Capture operations
To accomplish this
Record Loop Capture
Play back Loop Capture
Overdub Loop Capture
Specify the Loop Capture volume
Delete a Loop Capture recording (1)
Delete a Loop Capture recording (2)
Sample a Loop Capture to a pad
Pattern operations
To accomplish this
Play a pattern
During playback, select the pattern to play next
During playback, switch the pattern immediately
Stop the pattern (1)
Stop the pattern (2)
Sequencer tempo setting (1)
Sequencer tempo setting (2)
Sequencer tempo setting (tap tempo)
Sequencer tempo setting (copy tempo from pad)
Record a pattern
Quantize setting
Specify the length of the pattern
Metronome on/off
Specify metronome volume
60
Do this
[EFFECT ASSIGN] + [CANCEL] + [MIC]/[LINE IN]
[EFFECT ASSIGN] + [SYNTH]
[EFFECT ASSIGN] + Pad [1] + [16]/ Pad [4] + [13]
[EFFECT ASSIGN] + [SUB PAD]
[EFFECT ASSIGN] + [REMAIN]
[EFFECT ASSIGN]
[REMAIN] + CTRL1 knob / CTRL2 knob / CTRL3 knob
[CANCEL] + [MFX]
[CANCEL] + [SUPER FILTER]
[EFFECT ASSIGN] + [TAP TEMPO]
[EFFECT ASSIGN] + [PATTERN SELECT]
➜
[EFFECT MEMORY] Pad [1]–[16]
➜
[EFFECT MEMORY] [SAMPLING]
➜
[EFFECT MEMORY] [REMAIN] + Pad [1]–[16]
Do this
[REC] ( [REC] to stop recording, and [PLAY] to move to playback)
(with a loop recorded) [PLAY] ( [PLAY] to stop)
(with a loop recorded) [REC] ( [REC] to play back, [PLAY] to stop)
➜
[PLAY] [START/END/LEVEL]
➜ ➜
[DEL] [PLAY] [DEL]
[EFFECT ASSIGN] + [REC]
➜
[SAVE TO PAD] Pad [1]–[16]
Do this
➜
[PATTERN SELECT] Pad [1]–[16]
During pattern playback Pad [1]–[16]
During pattern playback [SUB PAD] + Pad [1]–[16]
[CANCEL]
➜
[PATTERN SELECT] Pad [1]–[16] (the pad of the currently playing pattern)
➜
[PATTERN SELECT] [TIME/BPM]
[TAP TEMPO] + CTRL2 knob
Press [TAP TEMPO] four or more times (display will temporarily show the pattern tempo)
[TAP TEMPO] + Pad [1]–[16] (BPM of that pad's sample is assigned)
➜
[PATTERN SELECT] [SAMPLING]
( [CANCEL] to stop recording)
During pattern recording standby / during recording [QUANTIZE]
( [QUANTIZE] ends the setting)
During pattern recording standby [LENGTH]
[METRONOME]
[METRONOME] + CTRL3 knob
➜ ➜
Pad [1]–[16] [SAMPLING]
➜
CTRL3 knob ( [START/END/LEVEL] to end settings)
➜
[SAVE TO PAD]
➜
CTRL2 knob ( [TIME/BPM] ends the setting)
➜ ➜
Pad [1]–[16] [SAMPLING]
➜
CTRL3 knob ( [LENGTH] ends the setting)
➜
CTRL3 knob