Table of Contents
Advertisement
MFX Output Level
8
(Multi-Effects Output Level)
Adjusts the volume of the sound that has passed through the multi-
effects.
Value: 0–127
MFX Chorus Send Level
9
(Multi-Effects Chorus Send Level)
Adjusts the amount of chorus for the sound that passes through
multi-effects. If you don't want to add the Chorus effect, set it to "0."
Value: 0–127
MFX Reverb Send Level
10
(Multi-Effects Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through
multi-effects. If you don't want to add the Reverb effect, set it to "0."
Value: 0–127
MFX Output Assign
11
(Multi-Effects Output Assign)
Adjusts the output destination of the sound that has passed through
the multi-effects.
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter is set to "MIX," all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).
Chorus Type
12
Selects either chorus or delay.
Value
0 (Off):
Neither chorus or delay is used.
1 (Chorus):
Chorus is used.
2 (Delay):
Delay is used.
3 (GM2 Chorus): General MIDI 2 chorus
Chorus Output Select
13
Specifies how the sound routed through chorus will be output.
Value
MAIN:Output to the OUTPUT jacks in stereo.
REV: Output to reverb in mono.
M+R: Output to the OUTPUT jacks in stereo, and to reverb in mono.
When set to "MAIN" or "M+R," the OUTPUT jack from which
the sound is output is set in Chorus Output Assign (
Chorus Level
14
Adjusts the volume of the sound that has passed through chorus.
Value: 0–127
Chorus Output Assign
15
Selects the pair of OUTPUT jacks to which the chorus sound is
routed when Chorus Output Select (
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
When Chorus Output Select (
will have no effect.
Reverb Type
16
Selects the type of reverb.
Value
0 (Off):
1 (Reverb):
2 (SRV Room): This reverb simulates typical room acoustic
3 (SRV Hall):
4 (SRV Plate):
5 (GM2 Reverb): General MIDI 2 reverb
Reverb Level
17
Adjusts the volume of the sound that has passed through reverb.
Value: 0–127
Reverb Output Assign
18
Specifies how the sound routed through reverb will be output.
Value
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter is set to "MIX," all sounds are
output from the OUTPUT A (MIX) jacks in stereo (p. 193).
Chorus Source
19
Selects chorus parameter settings. If you want to use the settings of
the patch or rhythm set assigned to the Keyboard part, select "KBD."
If you want to use the settings of the patch or rhythm set assigned to
the Pad part, select "PAD."
Value: KBD, PAD
).
15
Reverb Source
20
Selects reverb parameter settings. If you want to use the settings of
the patch or rhythm set assigned to the Keyboard part, select "KBD."
If you want to use the settings of the patch or rhythm set assigned to
the Pad part, select "PAD."
Value: KBD, PAD
Adding Effects
) is set to "MAIN" or "M+R."
13
) is set to "REV," this setting
13
Reverb is not used.
Normal reverb
reflections.
This reverb simulates typical concert hall acoustic
reflections.
This reverb simulates a reverb plate, a popular
type of artificial reverb unit that derives its sound
from the vibration of a metallic plate. You can also
achieve unusual metallic-sounding reverbs using
"SRV Plate."
177
Advertisement
Table of Contents
