Table of Contents
Advertisement
Panel Descriptions
Front Panel
fig.00-01S88
14
13
1
D BEAM
You can apply a variety of effects to sounds simply by moving your
hand. → (p. 98)
ASSIGNABLE
Turn on the D Beam function for the Keyboard part or pad part. →
(p. 98)
PAD TRIGGER
Instead of striking the pads themselves, you can also use the D Beam
controller to control the sounding of the pads. → (p. 99)
SOLO SYNTH
Play the Fantom-S as a monophonic synthesizer. → (p. 100)
* Hold down [SHIFT] and press one of the corresponding buttons to
access the D Beam setting screen.
2
EXT SOURCE
Make external input settings. → (p. 118)
3
[VOLUME]
Adjusts the overall volume that is output from the rear panel
OUTPUT A (MIX) jacks and PHONES jack. → (Quick Start; p. 4)
[V-LINK]
Make V-Link settings. → (p. 201)
4
[
]REALTIME CONTROL knob
You can assign a variety of parameters and functions to the four
knobs and use them to modify the sound in realtime. → (p. 33)
The operation will depend on the parameter or function that is
assigned.
[
], [
]ASSIGNABLE switch
You can assign a variety of parameters and functions to the tow
buttons and use them to modify the sound in realtime. → (p. 33)
The operation will depend on the parameter or function that is
assigned.
14
1
2
4
5
6
15
3
9
10
7
8
11
[-OCT], [+OCT]
Transposes the pitch of the keyboard in 1 octave units (-3- +3
octaves).
[RPS]
Switches RPS on/off.
5
Perform functions related to the arpeggio, rhythm pattern, chord
memory function. → (p. 104, p. 110, p. 112)
[ON/OFF]
Switches the arpeggio and Rhythm on/off.
[ARPEGGIO HOLD]
Switches the Arpeggio Hold function on/off.
[CHORD MEMORY]
Switches the Chord Memory function on/off.
[SELECT/EDIT]
Make arpeggio, rhythm and chord memory settings.
[BEAT] (Beat Indicator)
This blinks in sync with the tempo and beat of the song.
6
Perform sequencer operations such as playback and record.
[RESET]
Moves the song position to the first measure. → (p. 138)
[BWD]
Moves the song position to the first beat of the previous measure. →
(p. 138)
[FWD]
Moves the song position to the first beat of the next measure. → (p. 138)
[Play]
Controls sequencer play.
[STOP]
Controls sequencer stop.
While stopped, you can hold down [SHIFT] and Press [PLAY] to
perform MIDI Update. → (p. 138)
12
Advertisement
Table of Contents
